A concrete-encased steel I-section column designed to AS 4100 (in conjunction with AS/NZS 2327's composite-specific provisions) checks axial capacity using an approach broadly similar to the CSA S16 encased composite column example covered elsewhere in this series, both addressing how a steel section embedded in reinforced concrete, rather than filled within a hollow tube, shares load between the two materials.
Every check above runs automatically inside the Structyze Composite Column module — this particular module is part of the full desktop catalogue rather than the free browser trial, since the trial only carries a curated flagship set. You can still try the free trial modules right now to see the same calculation style in action on RCC Beam, Column, Slab and a handful of others.
The Example We'll Use
- Column: 250UC89.5 steel section fully encased in a 450 mm × 450 mm reinforced concrete column, height 3.5 m
- Steel: f_y 320 MPa, concrete: f'c 32 MPa, longitudinal reinforcement: 8-20 mm bars
- Design axial load N*: 3,450 kN
Working Through It
Nominal section capacity at zero slenderness, combining the steel section's, concrete's, and reinforcement's individual contributions per the composite column provisions: N_s = 5,280 kN.
Effective flexural rigidity (EI)_e, combining the steel section's full stiffness with a reduced concrete and reinforcement contribution reflecting cracking and long-term effects.
Member slenderness reduction factor α_c, derived from the column's modified slenderness ratio using (EI)_e: α_c ≈ 0.84 for this column's height and section.
Design axial capacity: φN_c = 0.9 × 0.84 × 5280 = 3,992 kN. Utilization: 3450/3992 = 0.86.
What Governs, and Why
Slenderness-reduced capacity governs at utilization 0.86, with a relatively mild buckling reduction (α_c = 0.84) reflecting this column's moderate slenderness and the significant stiffness contribution from its substantial concrete encasement — a similar overall pattern to the CSA S16 encased composite column example elsewhere in this series, both showing that generously proportioned concrete encasement around a steel core delivers a truly favorable stiffness benefit for buckling resistance, not just added strength.
Where Structyze Takes Over
Every check above runs automatically inside the Structyze Composite Column module — this particular module is part of the full desktop catalogue rather than the free browser trial, since the trial only carries a curated flagship set. You can still try the free trial modules right now to see the same calculation style in action on RCC Beam, Column, Slab and a handful of others.
For Composite Column and the rest of the full catalogue — 80+ components across RCC, Steel, Composite, Timber, Masonry and more, across 20+ design codes — buy the full Structyze desktop app or see everything it does on the Software page.
Quick FAQ
Does AS 4100's composite column approach credit concrete encasement the same way Eurocode 4 credits concrete-filled tubes?
Both approaches recognize a genuine composite stiffness and strength benefit, but the specific mechanism differs — concrete encasement around a steel section (as in this example) contributes differently to confinement and stiffness than concrete confined within a hollow steel tube (discussed in the Eurocode 4 and AISC 360 examples elsewhere in this series), reflecting the different physical arrangement of the two materials in each case.
Is reinforcement in the concrete encasement required for structural capacity, or just for crack control?
It contributes meaningfully to the column's overall capacity (as reflected in the N_s calculation above) in addition to its crack control role, unlike the lighter nominal reinforcement sometimes used in RCC members purely for ductility and crack control purposes, discussed elsewhere in this series.
Final Thoughts
Comparing this AS 4100 encased composite column against the CSA S16 example elsewhere in this series, both show the same underlying pattern — substantial concrete encasement delivers a genuine, favorable stiffness benefit for buckling resistance. A consistency that again suggests shared physical reality, not coincidental similarity between two independently calibrated codes.